Schuck 3Dthe kosher 3D print marketRequest a printSign in
Level 1 tricks

Print tip: 3MF and STL files, and which printer they work on

What is inside a 3MF file, whether it works on printers other than Bambu, and when to use the STL.

Schuck 3D · Nov 19, 2026 · 1 min read

Print tip: 3MF and STL files, and which printer they work on

Most files on this site are 3MF files. Here is what that means if your printer isn't the same as mine.

STL: just the shape

  • An STL is the shape and nothing else. No colours, no settings.
  • Every slicer opens it.

3MF: shape plus settings

  • A 3MF is an open file type that any modern slicer can open.
  • Mine are saved from Bambu Studio, so they also hold the plates, the colours and my print settings.
  • Bambu Studio and OrcaSlicer read all of that.
  • Other slicers, like PrusaSlicer or Cura, open the shapes. Colours and settings may not come across.

Using my files on another printer

  1. Open the 3MF in your slicer.
  2. Choose your own printer and filament when it asks.
  3. Check the size and the colours on each part.
  4. Slice it again for your printer and print.

If the 3MF gives you trouble, use the STL files. Many designs here have them in the download.

Keep reading